San Diego Hardwood Floor Refinishing

The system is a three-step process that requires no sanding. The traditional method of refinishing entails screening and sanding, which creates a lot of dust and inconvenience for homeowners.

The Wood-Solv^TM program uses formulas that chemically abrade and refinish the topcoat, requiring no sanding. Instead, our technician employs low-speed (175 rpm) buffer and medium-grade buffing pad.

Small to medium size scratches can be repaired with putty.

When repairs are complete, Step 3, the catalyzed urethane top coat, is applied, making the repair even more invisible to the eye, so you make scratches almost undetectable.

In addition, the process is fast. According to the standard of a 15x15 feet room using a two-person team, a job can be completed in about four hours, assuming there are no repairs to be made.

It takes a half hour for step one preparation; step two can vary in time, depending on the extend of required repairs; a half hour for step three, which dries in 75 minutes, and a half hour for application of the second coat, followed by another 75 minutes to dry.

The top coat is twice as durable as conventional wood finishes and does not yellow as it ages. Additionally, the chemicals produce no hazardous fumes, so there is no need for special ventilation during application.

On average, the finish is expected to last as well as or better than other residential top coats. The industry standard for the life of a top coating is three to five years.

Benefits of refinishing your hardwood floor with Wood-Solv^TM

Minimal disruption and mess - the system takes less than one day to complete without messy sanding, and in 8 hours they can go lightly on their floors. In 24 hours, the floor is fully rejuvenated! A contractor would need almost a week to clean, sand, finish, and clean up. And, the dust from the sanding would be throughout the house!

Professional Results - high quality products from RPM's Wood Finishes Group, a leader in wood coatings. The finish is more durable than competitive finishes, with 5 times the solids.

Savings versus Contract Sand and Finish - a contractor would charge anywhere from $5 - $8 per square foot to complete the same project. So Wood-Solv^TM is an economical alternative to waiting for the floors to deteriorate to the point of sanding and refinishing.

To get your free quote, call (858) 483-5300 or click here to schedule an appointment.